Challenge of Reverse Engineering

Cracked by Whiterat

CrackMe owned by high6

My first crack me and my "first" C++ app(I have made dlls before but not exe). http://www.mattsbox.co.uk/high6/Files/crackme1.rar crackme1.rar Have fun . If you think you have it check the hint first. Hint: The messagebox is a fake .(the correct password doesn't have a messagebox popup) Note: Not packed. Hint2: There are over 100 jumps and over 200 calls to assemble the password.

CrackMe owned by Till.ch

Soda mailed me to tell me ASProtect 2.3 SKE was listed in a tutorial on the site but the unpackme was not listed in the unpackme's. Seems that since the change over to the new site layout it got removed For those interested in it you can find it here: http://www.tuts4you.com/download.php?view.1684 I'll have to double check and make sure there are no others that slipped past during the site update... Ted.

UnpackME.rar Good Luck

Hello, pio-#1 cRackMe A easy crackMe try it... Want: Cracked.exe/Patch Level: 1/10 Coded: Delphi Packed/Protected: cRackMe is Attached! greetz pio__1.cRackMe.crackme_SND.zip

GOAL: Goal is to register the ReverseMe. This is visualised if it says at startup "REGISTERED to:" followed by the name you registered it for. ABOUT: Mostly byte coded in assembler (masm). Not packed. You may either patch, fish or keygen. More info in About box. Obviously, no aesthetic-patching-only allowed. INFO: It's not the algo that makes the challenge! The algo is short and easy, the real challenge lies in the obfuscation and stuff! I take my hat off and bow deep for those bringing a valid solution! Please explain how you did it. MORE INFO: On a sidenote: it was also a challenge for me as I had never byte coded such a long part in one target. Don't be surprised when…

tElock 0.99 http://tuts4you.com/download.php?view.1678 Ted.

NTkrnl Protector 0.15 http://tuts4you.com/download.php?view.1677 Ted.

Ok, here it is - easy VB6 coding, easy upx packed.. only one RULE: - no cracking/patching, just *fish* for it This is my first fishme so dont be dissapointed if it's too easy, its good to practice, right :?) serialFishMe_byChupaChu.zip *there are many solutions possible for this one* so keygening it could be a challange also - but then you must write a tutorial for this one Have a nice day!

Celsius Crypt 2.1 http://tuts4you.com/download.php?view.1620 Ted

HHHiii teammm!!!! I

AsCrypt 0.1 http://tuts4you.com/download.php?view.1621 Ted.

ChinaProtect 0.3 http://tuts4you.com/download.php?view.1619 Ted.

Well out of boredom I decided to make a keygenme (incredibly simple routine) and to make it even easier I made it in .NET rather than VB6 Anyways, how fast can you get this one? http://dump.stoleyour.net/uploads/d6cb367683.rar

DefuseMe #1 SerialFishing, Patching, (& Keygenning?).... Ready, Steady, Go ! -Homage to an old arcade game in the 80's (BombJack). -Written in VB .NET and not packed. -Needs .NET 2 to be installed. -No antis or difficult algos, but I tried to make it not too easy... DefuseMe__1_UFO_Pu55y.rar

Hi, This is the first keygenme i m posting. It is quite simple as far as I see it. My Rating : 1-2/10 You can post guideline for people new to keygenning. Regards , Oricode Oricode__s_KeygenMe_1.rar

This new unpackme using a new custom packer (Smon - I think it is called ) found its way to me. Thought someone here may find it of interest. http://tuts4you.com/download.php?view.1606 I haven't even fired it up in Olly yet so I couldn't tell you what level of difficulty it is... Ted.

Here is SnD UnPackMe #1 A quote from the included .nfo file: Ted. snd_sndunpackme_1.unpackme.zip

Reg me level 1 & level 2 easy try it http://www5.evilshare.com/6ca682d6-3ce6-10...7b-00a0c993e9d6

Hello Serialme v1.0 I have done a small and i think easy Serialme try it Want: Serial Level: 1/10 Coded: Delphi Packed/Protected: Serialme: />http://anonym.to/?http://rapidshare.com/files/24676356/pio-serialme.zip.html Cheers

How to unpack Armadillo 1.84 ?

http://www.4shared.com/file/13606568/1c0c9e8/K0yg0nM03.html SuperCracker & Angel-55 .... hmmmmmmmmmmmmmmmmmmmmm for All

http://www.4shared.com/file/13498921/b56df...K0yg0nM0_2.html Good luck , hhhh