How use Instant Demo (used on tuts4you tutorials) to continue doing tutorials after Flash has been disabled?

[francorossini]

Hello guys,
I need your help, please. 
Many old reverse engineering tutorials on tuts4your use this program: Instant Demo
https://www.instant-demo.com/download.php

I installed this program again but now it not possible anymore because it always ask for Flash



I tried to follow here but these solutions works only for browsers but not for software that use Flash
https://superuser.com/questions/1616866/use-flash-player-after-12-jan-2021

Is there a solution or an alternative? Because I really like Instant demo to do the tutorials in particular the 'comic' mode of the captions and the use of hostpots.
Are there any other software like this?
Thank you for any help

[amateur]

Hi.

You need to have installed a standalone flash player. Install Macromedia Flash Player (v8 for example), and then it will work!

A very good alternative is FlashBack Player (also used in a lot of tutorials)

Edited April 6, 2021 by Am4t3uR

[pusheax]

search for flash player debug and download it for your os, then open the file and open with the downloaded exe

[francorossini]

5 hours ago, amateur said:

Hi.

You need to have installed a standalone flash player. Install Macromedia Flash Player (v8 for example), and then it will work!

A very good alternative is FlashBack Player (also used in a lot of tutorials)

Thank you very much.
I followed your instruction and I download Macromedia from here
http://www.oldversion.com/windows/macromedia-flash-player-10

I install flashplayer10_1r53_64_winax and after that the error message vanished.

P.S: I haven't tested it yet, but I also report this
https://github.com/darktohka/FlashPatch

Edited April 6, 2021 by francorossini

[Xyl2k]

you can still install latest flash version and patch Flash32_32_0_0_465.ocx, NPSFW32_32_0_0_465.dll/NPSFW64_32_0_0_465.dll

 

 

0FC4F07E     DC1D D0018B10          FCOMP QWORD PTR DS:[108B01D0]
0FC4F084     DFE0                   FSTSW AX
0FC4F086     59                     POP ECX
0FC4F087     59                     POP ECX
0FC4F088     F6C4 01                TEST AH,1
0FC4F08B     75 05                  JNZ SHORT Flash32_.0FC4F092
0FC4F08D     33C0                   XOR EAX,EAX
0FC4F08F     40                     INC EAX
0FC4F090     EB 02                  JMP SHORT Flash32_.0FC4F094
0FC4F092     8BC3                   MOV EAX,EBX

 

 

 

Edited April 7, 2021 by Xyl2k

[whoknows]

@francorossini

NO FLASH required from v11 and onward!!

[LCF-AT]

Hi guys,

I aslo have a problem using a small app which needs some flash installed files (ocx) I don't have anymore and I also can not install a flash ax installer. On internet I found some infos to uninstall flash (I dont have flash on Win 10 x64) and then to install flash using "install_flash_player_ax32.....exe" in a Win 7 com. mode but this dosen't work and I get a info.....

...and can not install flash.So in my case its not working.Of course I can use the standalone flashplayer like "flashplayer_32_sa" to run flash files into but other tools need to have access on those flash ocx & NPSFW files which gets created on installing.My question now is where to get those files without doing a install (fails in my case)?So I do remember that ocx files / dlls can be registered manually (did few times on Win 7 long time ago).Maybe its also not needed and just need to have those ocx file in same app folder to make it run / not sure yet.Just wanna ask whether you do know what I can do or whether anyone of you could upload your flash / ocx files / from installing (x32) so that I could try it manually etc to make it maybe work.Thank you.

greetz

[vikash]

9 hours ago, LCF-AT said:

Hi guys,

I aslo have a problem using a small app which needs some flash installed files (ocx) I don't have anymore and I also can not install a flash ax installer. On internet I found some infos to uninstall flash (I dont have flash on Win 10 x64) and then to install flash using "install_flash_player_ax32.....exe" in a Win 7 com. mode but this dosen't work and I get a info.....

...and can not install flash.So in my case its not working.Of course I can use the standalone flashplayer like "flashplayer_32_sa" to run flash files into but other tools need to have access on those flash ocx & NPSFW files which gets created on installing.My question now is where to get those files without doing a install (fails in my case)?So I do remember that ocx files / dlls can be registered manually (did few times on Win 7 long time ago).Maybe its also not needed and just need to have those ocx file in same app folder to make it run / not sure yet.Just wanna ask whether you do know what I can do or whether anyone of you could upload your flash / ocx files / from installing (x32) so that I could try it manually etc to make it maybe work.Thank you.

greetz

Hi ,

You can use this tool 

[url=https://ibb.co/ckh6txW][img]https://i.ibb.co/rF2xMvB/2021-10-04-114300.png[/img][/url]

 

https://workupload.com/file/wWdb8mTFf8E

 

Thanks good day

 

 

 

[LCF-AT]

Hi,

thanks but I was not talking about the StandAlone Player (you can still dl on Adobe) which I can use directly for flash files.I was talking about the activeX file what other tools need to run flash. Anyway, so I found a old (v7) flash32..ocx file on internet and did register it manually on system and now the tool is working. Didn't found a newer ocx version but its also working with that old one.

greetz

[whoknows]

@LCF-AT

github.com/CleanFlash/installer

is helping ?