Jump to content
Tuts 4 You

How to find "0x6857c8" location in an SSD Drive?


Jason Long

Recommended Posts

Hello,

I have a device (MITEL 3300) that it can't boot at "0x6857c8" address. When I plugged an SSD Drive into that device, then it can't boot at "0x6857c8" address:

MITEL SYSTEM ROM R3.1/10 Aug 5 2011 (83 - POWER_ON_RESET)

CCA Number : 36879572 Ra.4
System Model : 00620001 F2500
CPU Model : 8360 R80480021
Reset Config Low : 0804008c
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 399
Core Clock (MHz) : 533
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 512
Local Memory (MB) : 0
Flash Memory (MB) : 4
MAC Address : 08000f640a40
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0

Starting POST...

SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS1 March Test........................ PASSED

Starting vxWorks...

Decompressing FPGA image...615412 bytes decompressed successfully

Programming the FPGA image...OK

FPGA version 0002:6123 loaded

SATA RAID Controller Not Present.











VxWorks System Boot


Copyright 1984-2002 Wind River Systems, Inc.





CPU: Mitel MMC-C PPC83XX F2500
Version: VxWorks5.5.2
BSP version: 3.1/10
Creation date: Aug 5 2011, 18:41:11




Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device : ata=0
unit number : 0
processor number : 0
host name : bootHost
file name : /partition1/RTC8260
inet on ethernet (e) : 172.18.6.5:fffffff0
host inet (h) : 192.168.137.10
gateway inet (g) : 172.18.6.14
user (u) : ftp
ftp password (pw) : ftp
flags (f) : 0x0
target name (tn) : MyPhone
other (o) : qefcc


Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
0KB added to /partition1 partition
free disk space after partition 0 is 0KB
0KB added to /partition2 partition
free disk space after partition 1 is 0KB
0KB added to /partition3 partition
free disk space after partition 2 is 0KB
0KB added to /partition4 partition
free disk space after partition 3 is 0KB
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/partition4) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/partition4) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /partition1/RTC8260...66125120
Starting at 0x6857c8...

Can I use a tool like "Hex Editor Neo" to find that address?

 

Thank you.

Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...