Jump to content
Tuts 4 You

Leaderboard

  1. Teddy Rogers

    Teddy Rogers

    Administrator


    • Points

      25

    • Content Count

      8,847


  2. Kurapica

    Kurapica

    Full Member


    • Points

      19

    • Content Count

      828


  3. CodeExplorer

    CodeExplorer

    Moderator


    • Points

      18

    • Content Count

      3,083


  4. kao

    kao

    Full Member+


    • Points

      18

    • Content Count

      2,294



Popular Content

Showing content with the highest reputation since 04/25/2020 in all areas

  1. 5 points
    What's the point of this? You ran my file under de4dot and repost it? i can recognise my file ya know, i intentionally left this out (i haven't finished local types yet but i manually set the third local to int32) + i added 9 locals when only 3 get used
  2. 5 points
    It might have a few weird instructions since i'm new to this Crackme-cleaned-Devirtualized2.zip Info: This is the first version of eaz that i analyze so i can't say how 2019.x is different from 2020.1 but its definitely not uncrackable Steps i took (as i should have included since the beginning): 1 Learn how CIL works / CIL fundamentals (there are some nice ebooks that i can't link here ) 2 Learn how the assembly reader/writer of your choice works (dnlib for example) 3 Learn how a simple VM works ( https://github.com/TobitoFatitoNulled/MemeVM (the original creator of this vm left so this is a fork to keep the project alive)) 4 https://github.com/saneki/eazdevirt See how the previous devirt was made (and you could also check previous eazvm protected executables) 5 Practice your skills trying to make MemeVM Devirt, you can message me if you have any issues with this step (You can always disable renaming on memevm to make the process easier to understand). 6 Start renaming a EazVM test assembly (you can make your own with trial) with all the knowledge you got from the previous steps (and find how crypto streams are initialized, where opcodes are located & how they are connected to the handlers etc etc etc, things that you would find in a vm) Editing saneki's eazdevirt might be a good idea, though i was more comfortable making my own base.
  3. 3 points
    New features, interesting. File correct? ggggg_cleaned.zip
  4. 3 points
    BinaryNinja has announced the new prices, and with no surprise are slowly also pushing themselves away from many users. https://binary.ninja/2020/05/11/decompiler-stable-release.html A personal (named) license is now $299 with the only 'new' thing being the not-so-exciting decompiler as seen above. They are starting to push themselves closer to IDA pricing, which is just plain stupid on their part. Ghidra's decompiler can be made to run anywhere, and thus, why would anyone pick BinaryNinja over IDA when it comes down to features? I don't feel like they are branding themselves well at all and are trying to target the wrong setups/situations. Their new blog post mentions things like: "Support for MacOS, Linux, and Windows. You’re not buying each platform separately." - Sorry but people that generally use this kind of software are users that stick to one primary OS for the most part. At most, people spin up a VM if they 'must' use a secondary OS for anything. This is not a selling point in my opinion at all. "Decompiler for all architectures." - Again, the decompiler is not impressive so far. Ghidra's can be made to run in BinaryNinja and IDA (along with anywhere else) and is 100% free. The value for this being a new reason to increase the price of BinaryNinja is just not there, at all. And sadly, like most other software companies, they still have this mindset that everyone is a student and consider their software "openly available for everyone" because they offer student pricing. Really wish companies would just stop with this nonsense. Price yourself better in general, don't selectively single out 1 small demographic. I'd wager most people in the RE scene are hobbyists, not students and are not directly in a career path that includes the use of these kinds of tools directly. The only thing BNinja has going for it that most people praise it for is a good API. Outside of that, you don't really hear anything else good/interesting about it. So this price jump is honestly a stupid move in my opinion.
  5. 3 points
    Hi , A disassembler is a software that coverts machine code (Hex) into assembly language mnemonic ex ( mov al,1) . A debugger is a program that allow you to detect and correct errors in other computer programs. A decompiler is a software which try to reverse the process of compilation to attempt to get the source code from a compiled executable . PS : try to use the google and the search button . Regards
  6. 2 points
    Here's the old content of Ubbelol.
  7. 2 points
    Who are you to say that it's shit? Have you made an unpacker for it? If you do, you are free to correct me but if you don't you shouldn't make these silly comments, in my opinion.
  8. 2 points
    View File Example CrackMe - Debug Blocker x64 This is an example for submitting a CrackMe in the Downloads section of the site. You can download the file and run Debug Blocker x64. Nothing too exciting will happen! The challenge here would be to patch the debug-blocker function so that it does not spawn a second process. Submitter Teddy Rogers Submitted 02/23/2020 Category CrackMe  
  9. 2 points
    This is a notification of intent to cease and close the Blogs section of the site in a months time. The reasons for the change are; lack of use, activity and popularity, and for the most part the forum categories have been and are more than capable to host similar blog like content in the future. This notification gives you the opportunity to copy any information from Blogs that you wish to retain and/ or repost in the appropriate forum... Ted.
  10. 2 points
    CCtor => 0x06000034 => Clean the antitamper => Clean cflow => clean string encryption and that's it Most cleans are done by tweaking some public cleaners. The right key is "Youdidit!"
  11. 2 points
    Hi it's because of your assembly code ! read about used instruction here(repne scasb) : https://c9x.me/x86/html/file_module_x86_id_287.html Fixed code : procedure TForm1.BitBtn1Click(Sender: TObject); var pointer_check, pointer_dummy: pointer; label bp_found, bp_not_found; begin pointer_check := @check_credentials; pointer_dummy := @Dummy; asm cld mov edi,pointer_check mov ecx,pointer_dummy sub ecx, pointer_check mov al,$CC repne scasb jz bp_found jmp bp_not_found end; bp_found: application.terminate; exit; //you will findout why you should use this bp_not_found: check_credentials('user', 'pass'); end; BR, h4sh3m
  12. 2 points
    Hi Finding start point of function is easy, you just need do something like this : var StartAddr : Pointer; begin StartAddr := @check_credentials; But for finding end of function, there is several ways: 1) search for "RET" instruction (C3, C2 xx) but if you're using "try/finally/except" statement your function will have several "RET(C3)" instruction. 2) You can define dummy function right after your function and get it's start address as end of your function ! function check_credentials(user : string; pass : string):boolean; begin if (user <> 'User') and (pass <> 'S3cret') then begin showmessage('Wrong Credentials'); end else showmessage('Congratulations'); result := true; end; procedure Dummy; assembler; asm end; procedure TForm1.BitBtn1Click(Sender: TObject); var StartAddr, EndAddr : Pointer; begin StartAddr := @check_credentials; EndAddr := @Dummy; Caption := IntToHex(NativeUInt(EndAddr) - NativeUInt(StartAddr)); //will get size of your function in byte (+1 byte for Dummy function) end; BR, h4sh3m
  13. 2 points
    Hello Here is unpacker source : https://ghostbin.co/paste/5vb67 Here is screenshot of unpacked file : https://i.imgur.com/NwIyqFd.png Here is unpacked file : https://www.sendspace.com/file/8nj8d4
  14. 2 points
    There are jobs like security analyst out there too but they are generally protocol oriented with background in cryptography and mathematics. Government agencies in all countries also recruit top talent. Otherwise, as a career choice unless as a malware analyst or software protection analyst or something it's too much of a niche to talk about. I got into RE because I enjoyed the challenge, and liked learning at lower levels or under the hood of how things work. Having a deeper understanding is my style for everything. That shadowy world lurks out there too but it's as organized and controlled as anything. It is a whole package deal to take that route, a lifestyle even. And even then you cant lose sight of what is right and what is wrong and where the laws draw the boundary. Fortunately merely toying around with some RE stuff is not really an issue. Software businesses and RE community have an interesting relationship but it's mostly been win-win despite occasional spats. Best hobby you can have though IMO
  15. 2 points
    If the only reason you want to learn RE is to have a unique skill for your resume/job application, you're very mistaken. Don't even try that. Anyone can learn to write (crappy) JavaScript/PHP/CSS in a few weeks and call himself/herself a "freelance web developer". Not everyone can become a reverse engineer - it requires a specific mindset and dedication. As for job positions, it really depends where you live and what your area of expertise would be. Analyzing malware requires a totally different skillset than finding bugs in hardware chips. Entry level positions usually are paid similarly to entry level developer positions. However, as a developer, you will have a pretty well-defined career path. As a reverse engineer, the path is less defined and really depends on your talent and dedication. It is possible to freelance and make a good living out of it - but again, it depends on your area of expertise. One of the best recent examples that come to mind, is Azeria (https://twitter.com/Fox0x01) - her ARM reverse engineering skills are superb. And there are freelancers who make $100k/year on HackerOne - but that's quite an extreme example. And then there is "dark side" - reverse engineers that work on not-exactly-legit tasks. For example, the entire game hacking industry is based on those. If you're a superstar, the customers will wait in line and the money is great. If you're just starting, you won't be able to make more than few hundred bucks a month - as you'll be competing with hundreds of Indians, Filipinos and Vietnamese in a very crowded market. First step would be to define the area you want to explore. As I mentioned above, reverse engineering hardware chips is totally different from reversing Windows malware. Once you know exactly what you want to learn, it will be much easier to suggest a specific book or course. Hope this helps. kao.
  16. 2 points
    When the cache gets up to speed you shouldn't see these topics in the activity stream/s. Any replies by moderators and administrators to topics in the Trashcan are for the topic starters eyes only... Ted.
  17. 1 point

    Version 11.10.2017

    23 downloads

    When using OllyDbg as a portable version (e.g. on an USB stick) there are always problems with the UDD/Plugin path not being set correctly. The features: DLL, which sets Plugins, UDD and win32.hlp paths automatically Dummy export so it's easy to add the DLL to your olly mod Open source Attached is DLL + Source, I hope it's useful for somebody. Feel free to modify to your needs, just credit where you think it's needed. P.S. To add the DLL to your mod: Use CFF explorer to add the import "dummy" (which does nothing) to ollydbg.exe, this will execute the DllMain function (which can be considered illegal) and set the paths in the INI file. OllyPath2.dll must be in the same directory than ollydbg.exe
  18. 1 point
    Civ VI Free on Epic Store https://www.epicgames.com/store/en-US/product/sid-meiers-civilization-vi/home
  19. 1 point
    View File VMProtect v3.4.0.1155 Try to unpack or alternatively provide a serial. If there is no solution provided by Saturday 11am (GMT+0) I will attach the same without debugger detection. Protections used: Debugger detection (User-mode + Kernel-mode) Ultra (Mutation + Virtualization) Disabled protections: Virtual Machine Packer Submitter whoknows Submitted 05/20/2020 Category UnPackMe (.NET)  
  20. 1 point
    How these Unpacking Posts are getting approved ? It is clearly written in the Rules that the solution of challenge will not be accepted if you don't describe the steps. Here everyone showing that they have cleaned it but no one is telling how ? so literally this is not a valid contribution to the forum if you don't descibe how it has been done. Just uploading files of cleaned is not all about unpacking. I think everyone must need to describe the steps or approach he has done to clean it. If I sound rude, I am sorry but this is what i feel.
  21. 1 point
    Write a Shellcode don't need RE?
  22. 1 point
  23. 1 point
    Thanks for reporting. Should be fixed now... https://forum.tuts4you.com/bimchatbox/ Ted.
  24. 1 point
  25. 1 point
    https://crystalidea.com/uninstall-tool/force-removal https://crystalidea.com/uninstall-tool
  26. 1 point
    Mine is a laptop and was ordered as a custom build so everything was pre-installed on arrival. The only things I have changed really are software settings, disabled startup items, services etc.and being a laptop not really sure of the motherboard specs I used to do a lot with hardware when I had my Desktop but really haven't kept up to date with latest hardware differences for a few years now since buying my laptop which was the best spec I could afford at the time so I could hopefully keep it for a few years with no problems It has i7-6820HK Quad Core 2.7GHz Overclocked to 4.1GHz, 8mb Cache with 32gb of DDR4 RAM with GTX1070 GPU with 8gb GDDR5 The BIOS is a pre-boot environment so although you can update it in Windows you cannot change any settings in Windows or via software, you either need to select recovery or similar in Windows settings which will then restart into it or press hotkey on restart Maybe someone else can advise you on BIOS settings for your hardware and BIOS manufacturer I used to get problems with my old Desktop and I found HWMonitor to be excellent to show problem temperatures due to inefficient fans
  27. 1 point
    I don't think running Win7 in VM will test anything, in fact it will be slower since it runs through a Win7 HDD driver to the VM HDD driver to your Win10 host system driver. For VM all I can think of us enabling virtualization in BIOS which should be on if you are a heavy VM user. But for CrystalDiskInfo you need a true Win7 boot. Your device manager settings sound good. The over optimizing of Win10 may be a lot of work for small gains and possibly causing random things to not work. On a powerful machine it should not be necessary to worry about Edge or service hosts. But context is key here especially if you feel significant slowdown compared to Win7. I would strongly consider the BIOS update again especially if downgrading is possible since you can restore back to your current version if it's a problem. Generally there is no noticable difference whatsoever. The chipset driver though I would estimate is 80% chance of being the problem source. Are you on Win10 build 1909? Older Windows 10 builds used different drivers for some devices. Also try properly installing and updating all drivers on the system. I've seen several times where fixing a bad audio driver resolved a lot of lag issues on a system. Check ASUS and specific vendor websites for latest and greatest for your build of Win10 which again hopefully is 1909.
  28. 1 point
    Except manufacturers are giving no change log except very vague things like "security enhancements" or "performance improvements" or "general fixes" or other ridiculously unspecific reasons for the release. So since you trust the original BIOS, and you trust the board manufacturer you bought the device from, you have no reason not to trust the updates. Although if this vague message sounds like it wont fix your problem, then I suppose you could base your action based on them. There is a risk of a botched update but its small enough that I have never had any problem BIOS updating any PCs, laptops or even routers and the like, though I have seen a few cases where people had to RMA devices for it so its not impossible. But if it happens you will almost certainly get it fixed for free by the manufacturer especially with a valid warranty still, at a cost of annoying inconvenience of time lost without the device. The only time I bricked a machine was when I hand patched the BIOS unsuccessfully and the machine would not boot or factory BIOS reset any longer. I ended up taking it to a laptop repair service that sent it to a lab that was able to flash the ROM directly by using machinery that attaches to the ROM chip itself by using the BIOS found on the internet. It did not take that long, less than a week as I recall and was surprisingly cheap though it was in Asia. Anyway @LCF-AT, trying the other driver versions is an excellent idea. If you could dual boot Win7, or run CrystalDiskInfo off of a USB key with a Win7/WinPE environment and check the benchmarks there to compare it would give you some real information whether there is some Win10 driver issue or not. The other options in device manager can be found on properties of the disk itself under disk drives there dealing with 2 kinds of write caching and sometimes power options. The power profiles I think have some settings related to this, and the CPU itself could be the problem. Apparently the way the CPU is operating has changed these benchmark speeds based on technologies that dynamically change clock speed or hyper-threading and such. This is based on reports I have read on the web about why SSD is slower than advertised. However, still, the chipset driver IMO is definitely to blame regardless of the situation, or some settings that influence it.
  29. 1 point
    If you have good qualifications (certificates in the relevant fields) then easy to get job. Without them the burden of proof is on you to convince them to hire you. Or you can do freelance jobs as already discussed in Kao's post above.
  30. 1 point
    I would install the BIOS update for sure. You basically have to trust your board manufacturer anyway, and all the updates it lists are for performance and security mostly. Sometimes they add code to handle specific drive types and such. It's a simple reboot to install. There are things to do but I'm not sure they will help. Like checking the TRIM command works and is in use, or write caching setting in device manager and power profile setting. I've read that some see Win10 slow benchmarks with SSD and Win7 fast which would indicate a driver issue still if that were true for you. But unless you have a dual boot or Win7 usb key to boot from and compare who knows
  31. 1 point
    Hi LCF-AT, if you want to get drivers installed, you need to find your motherboard chipset drivers as they should contain all the PCIe drivers and it would rarely be a separate package. Since you said your motherboard is an Asus with Intel H310, I would install Intel's chipset INF utility here: https://downloadcenter.intel.com/product/133348/Intel-H310-Chipset Also ASUS: https://www.asus.com/Motherboards/PRIME-H310M-E-R2-0/HelpDesk_Download/ gives you an older but perhaps customized option to try though my instinct would be to choose Intel's first but everyone has their own experiences as whether to use the laptop or board manufacturer or the chip manufacturer for drivers. Since Intel offers them freely and publicly and does not restrict to OEM in this case, I usually prefer it since you get later versions, and mostly the OEMs do no customization anyway. You can grab the management engine drivers too but they wont have an effect here. Intel Rapid Storage Technology should be completely unnecessary as well. Also best to have a latest updated BIOS. According to ASUS this should be BIOS 1007 Otherwise I cannot explain it. Your SSD specs say "R/W speed up to 3500/3000MB/s" though it could be for NVMe 1.3 with PCIe v3. From here: https://www.enterprisestorageforum.com/storage-hardware/pcie-ssd.html it shows PCIe v2 "Sequential read speed: about 1500 MBps Sequential write speed: about 1400 MBps" Again you are still on the short end of this for a drive with good specs. Windows should be booting in a few seconds. I hope you can get another 30-50% throughput out of your new drive.
  32. 1 point
    That's all the code in it, It was a simple Seek and Replace small program Need any help ?
  33. 1 point
    I once post it in a China forum, you can visit it in https://www.52pojie.cn/thread-762832-1-1.html by Google Translator I try my best to introduce it using English 1. download x64dbg and download the symbol file of clr.dll (mscorwks.dll if runtime is .net2.0~.net3.5) 2.set a breakpoint at "SystemDomain::ExecuteMainMethod" in clr.dll/mscorwks.dll and run 3.use MegaDumper (I use my ExtremeDumper based on codecracker's megadumper https://github.com/wwh1004/ExtremeDumper) to dump the main module when the program break at "SystemDomain::ExecuteMainMethod" 4.fix pe header and maybe you shoud also fix .net header This way is more complex than use MegaDumper only and directt dump the assembly. But if the assembly is packed with native stub and protected with anti dump (ConfuserEx and others) or protected with whole #US encryption (DNGuardHVM and others), maybe this way is good to dump assemblies. If you can not understand it, you can reply me. Best wish.
  34. 1 point
    if you understand how vm's works you can devirtualize any .net target. for start you can read saneki's eazdevirt source code. Crackme_2-devirtualized.rar
  35. 1 point
    1) There was nothing new, unlike the old versions, I did not replace the HWID, I just found the button in the NAG and patched the execution result, because the file did not have a constant, it worked. 2) One of the functions was under the virtual machine, not counting the EP. CISC vm is a simple virtual machine and the code was small. mfcapplication1_unpacked.rar
  36. 1 point

    34 downloads

    This tutorial will explain how to use the Execute Till User Code function to trace MessageBoxes in Delphi, which is a little different than other programming languages. I try to explain it in a way beginners can understand it! I hope you will enjoy this tutorial, and that will come in handy once!
  37. 1 point

    8 downloads

    A Shockwave Flash movie tutorial showing a method of keygenning Kurapica's CrackMe #15. It includes the source code for the keygen.
  38. 1 point

    8 downloads

    A video tutorial on keygenning BadSector CrackMe #1.
  39. 1 point

    10 downloads

    A Shockwave Flash movie tutorial showing a method of keygenning a simple KeygenMe. Example code is in Delphi.
  40. 1 point
    Hey there, i've been playing with VirusTotal graph since some weeks. Originally i did a graph just for building a landscape of files for ATM Wall, the graph can be seen here: https://www.virustotal.com/graph/embed/g9521270d163a4778aa5bc376c0d80375b11f2d95beee484498dbdaafc989ee5f I got the idea of doing this after having seen the work of @vanjasvajcer about ATM malware classification. But i started to got vicious with VT graph so here is some interesting graphs i did based with VT and kernelmode.info: Zeus World (v2.1.0.1 and inferior): https://www.virustotal.com/graph/embed/gf17a46025f554bc4a4d0edaff78d4aabee6388c959584ac8981961ae32af6994 Big nebula of zeus builders since code leak of v2.0.8.9, contain also few very old builders and some have funny messages inside destined to AV vendors. IceIX World (v1.2.5 and v1.2.6): https://www.virustotal.com/graph/embed/g3e3dfb66d191404593284509fbf9028c5253ee1651ee4da9b24225bf262634bf Citadel World (v1.3.4.5 and v1.3.5.1): https://www.virustotal.com/graph/embed/g1d0637aa096e45b2b1336844fe81e1e286a588fa049a4d529357c0a1d2f1646d Atmos World (v1.01): https://www.virustotal.com/graph/embed/ga7f70bed1f6f4394b4b503b5dcee997c66251a48418b4b3fba03119d3196389e Builders, releases, fews files. SpyEye World: https://www.virustotal.com/graph/embed/g98d5440408854a90b8e5fce2bd4003b40a7295519d5c4e0abe39a470a9fcadb5 Research about plugins are based on the spyeye thread on kernelmode.info, contain a nice timeline of the versioning and most of interesting files i guess. Carberp 'krabs.7z': https://www.virustotal.com/graph/embed/gd6210da59ece445f8e0469a7408a4905126fa5722cdb4b759330e073a29e7429 Files annotation based on kernelmode.info thread again (https://www.kernelmode.info/forum/viewtopic.php?f=16&t=2793), chaos mosaic at the image of the archive. BestAV affiliate: https://www.virustotal.com/graph/embed/g0741bdd40e4b4bc7a4c77e8240de0667f2ea89df4124484b87717ad081f741aa Lot of FakeAV files found with communicating IPs, graph based also on fews posts on kernelmode and also from my personal archive about thoses guys And not related to malware but you can do also funny things: Looking for an ollydbg modification ? https://www.virustotal.com/graph/embed/gd11e600f461c476082159553dadde7ac102288cd74df42d38f84291e97f2263a You have lost your SoftIce CD ? https://www.virustotal.com/graph/embed/g7534bcb28a2a439a8d466f69542374127b54265b605c4589adbf97191a1b0467 a small landscape about dongle piracy https://www.virustotal.com/graph/embed/g035609ac24c94751ae94aef309b6599010d8ccd1549f49f3b8ef7e20febd3f9f
  41. 1 point
    You don't need to know correct key to get the flag: Is that what you're looking for? How-to: 1) Run and dump from memory; 2) (optional) Fix imports with Scylla; 3) Load dump in IDA; 4) Find WndProc and see how WM_COMMAND is handled; 5) The key check is very convoluted but it all ends up here: ... lots of horrible operations with entered key .. strncpy(buffer, encryptedFlag, 25); for ( n = 0; n < 25; ++n ) { v3 = buffer[n]; v4 = HIDWORD(v3) ^ HIDWORD(v20) ^ HIDWORD(v21) ^ HIDWORD(v22) ^ HIDWORD(v23) ^ HIDWORD(v11); v8[2 * n] = v3 ^ v20 ^ v21 ^ v22 ^ v23 ^ v11; v8[2 * n + 1] = v4; decryptedFlag[n] = v8[2 * n]; } // check last 2 bytes of decrypted flag result = 24; if ( decryptedFlag[24] == 'Z' ) { result = 23; if ( decryptedFlag[23] == 'C' ) ... Xor key for all bytes is the same. You know encrypted flag. You know last 2 bytes of decrypted flag. So, you can deduce XOR key and decrypt the flag.
  42. 1 point
    Nice... Tutorial Video İs Here.
  43. 1 point
    Run the unpacker in netbox 4.0 :
  44. 1 point
    View File PR PSD TEMPLATE PR BY ALFARES AT4RE.rar Submitter alfares Submitted 06/18/2016 Category AT4RE Skins
  45. 1 point
    I too am dubious about your claims, and here is why... For a malware analyst you are asking some pretty basic questions about malware, unpacking and RE For a chief independent researcher you are asking some basic questions which have been answered numerous times, I would expect a researcher to use search or google... For someone who has been programming for over 10 years it really surprises me that you cant create a little code to open a file and change a byte... You are 20 years old, you have been programming since 10 years old? You started your career when you were 15 years old? It's not a good start, your intentions might be good but none of your statements add up so I very much doubt you will get what your asking from here. BTW, you can ask whatever you like for software but it doesn't mean anyone will buy it at that price, do u have a business plan? Do you have any sales so far or just ideas? Just my opinion of course, sorry
  46. 1 point
    File Name: Combinator - Skin+Psd (TeamREPT) File Submitter: Tracer File Submitted: 30 Dec 2011 File Category: uPPP Skins The "Demo.rar" in here is only the finished Patch, the complete Skin have incl. psd-file 9,9 MB (To big to upload it here) Download the full package instead here: https://forum.tuts4you.com/topic/28052-combinator-skinpsd-teamrept/#entry165901 Or from ZippyShare... http://www1.zippyshare.com/v/43588772/file.html COMBINATOR One Skin \ Countless Design Possibilities Why Combinator ? Because i build many Themes & Features inside the PSD File, you be able to change the complete Design in 5 Minutes! Take my ready 2 use Themes or just make your own: just select a Theme Layer and klick on a Style in your Photoshop, now you have a new Frame, but you could more, now combinate the Frame with a new look for the Button-Bar and select another Logo for the Window... How it Works ? Check The Quicktour (Pics) Tutorial : (Folder: \Customize Skin-Gfx\Combinate+Re-edit Quicktour\) THE DETAILS: ───────────────────────────────────────────────────────────────────────── WINDOW FX: + Activate \ Deactivate some Mainwindow FX like "Holes & Screw" + Activate \ Deactivate "Logo-Scanlines" + Have the Choice of 2 Gloss Styles for the Logo MENUE THEMES: + 14 ready to use Themes for the Menue-Frame + Easy to make your own Themes with 3 Clicks (See the Tut) LOGO THEMES: + 13 ready to use Rept-Logos + Easy to add new Logos (See the Tut) BUTTONBAR THEMES: + 6 ready to use Themes for the Button-Bar. + Easy to make your own Theme with 3 Clicks (See the Tut) SCROLLER THEMES: + 8 ready to use Scrollbar-Themes + Easy to make your own Theme with 3 Clicks (See the Tut) Combinate all this together with new Styles, Experimenting with the Layer FX... and this Patch-Skin never getting old, just update the Skin with a few clicks! Click here to download this file
  47. 1 point
    here is attached combinator_uppp_skin.rar
  48. 1 point
    ..and one more tutorial on the same subject: http://hooked-on-mne...or-cleaner.html
  49. 1 point
    This Template (5,4 MB) comes with some Basic Patch\Keygen Elements & a Hand full of sorted PS-Styles (more "element" optimated instead of text-fx) Notes: - Take some Elements of your Choice and resize\rearrange it in the way you like it. - Now load the included Style-Pack (or use your owns), click on a element Layer and check out some styles (Like Glass, Glossy, Metall) - do this on each Layer you have - just experiment...(with or without shadow in the FXlayer-Section etc.) Now (5-10 Minutes later) you have a "individuall" Patch-Skin...(Not really "Elite" but when it's should be go fast and you are time limited, i think this Template is ok How to install the PS-Styles? - read included .nfo sorry 4 my bad english, cheers... PREVIEW: If you want to see a Skin from this Template in Action: Spotlight Dup2Skin skin-o-matic.rar
  50. 1 point

    582 downloads

    Turntableized Skin...
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...